Publicidad
Step 10
Step
Fasten the BALLAST (U) to the BOTTOM (D). Use four
å
BLACK 1-1/8" PAN HEAD SCREWS (9S).
Fasten three METAL BRACKETS (4G) to the BALLAST (U).
å
Use three BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: Be sure the edges of the METAL BRACKETS are
å
even with the edge of the BALLAST.
Fasten the BASE (G) to the BALLAST (U). Use three BLACK
å
9/16" LARGE HEAD SCREWS (1S).
www.sauder.com/services
BLACK 9/16" LARGE HEAD SCREW
(6 used for the METAL BRACKETS)
G
420612
1S
4G
U
9S
BLACK 1-1/8" PAN HEAD SCREW
(4 used in this step)
Page 15
Publicidad
