Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty carton
å
to avoid scratching your unit or the fl oor.
To begin assembly, push ten SAUDER TWIST-LOCK®
å
FASTENERS (10F) into the large holes in the ENDS (A2 and B2).
Repeat this step for the BOTTOM (D).
å
10F
(10 used)
Page 6
Do not tighten the TWIST-LOCK® FASTENERS in this step.
B2
420612
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
A2
10F
10F
www.sauder.com/services
Publicidad
