Publicidad
3
APPLY TAPE AND MARK THE CORRECT MOUNTING POINTS.
•
Apply masking tape above
the mounting points you
identified in step 2.
•
Use a marker to make a
mark on the masking tape
that corresponds to the
center of the mounting
point hole.
4
APPLY TAPE AND MARK THE WEATHERSTIPPING.
•
Carefully align and reinstall
the weather-stripping.
•
Apply masking tape in the
appropriate locations on
the weather-stripping to
correspond to the marks
made in step 3.
•
Use a marker to transfer
the marks made in step 3
to the masking tape on the
weather-stripping.
CAUTION: The
weather-stripping
must be aligned
properly prior to
making the marks.
5
MEASURE AND MARK THE WEATHER-STRIPPING.
Measure and mark .5"
to the left and .5" to the
right of the center marks
you made in step 4.
Instruction #1036057B - Page 3 of 11
1
2X
Publicidad
