Husky 33094 Instrucciones De Ensamblaje, Instalación Operaciones Y Mantenimiento página 4

9. Install frame brackets to the frame using appropriate hardware and tighten snug, but do not torque at this time
(See figure 4).
Confirm the pilot holes that were drilled in the bed in the previous step are in line with the flange bolt holes in
the brackets before drilling the larger holes.
10. When satisfied with the alignment of the pilot holes, remove the brackets and enlarge the 3/16" holes with the
1-5/16" circular hole saw. Drill completely through the truck bed, but do not drill into the frame.
Check for obstructions before drilling. Failure to do so could result in damaged fuel or brake
lines, structural members, etc. HUSKY TOWING PRODUCTS does its best to communicate tow
vehicle manufacturer changes; however, it is ultimately the responsibility of the installer to
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty
Information / Tech Support / Product Updates. ©2018 LKQ SPG. All Rights Reserved. June. 26, 2019-REV7
Passenger's Side Front Bracket
DO NOT lubricate threads. It may cause bolt failure.
prevent damage due to installation.
Shown
WARNING:
CAUTION:
Figure: 4
4