Conditions Of Warranty; Declaration Of Conformity - Sagola COMPACT 220 Manual De Instrucciones

This guarantee has been manufactured with strict
precision an d has been subjected to a large number
of controls before it left the factory.
The GUARANTEE is for 2 years, counted as of the
date of purchase, which will be indicated by the
establishment where the apparatus is purchased in
the place provided for this purpose, together with its
stamp.
The GUARANTEE covers all nanufacturind defects
which will be repaired free of charge. Nevertheless,
all those malfunctions which are the result of the
incorrect use of the apparatus, such as incorrect
connections, breakage due to the apparatus being
dropped or similar, normal wear and tear and in gene-
ral, any deficiency not attributable to manufacture.
Likewise, the GUARANTEE will became invalid
should be abserved that the apparatus has been
handled by persons other than our Technical Service
personnel.
This GUARANTEE does not support any commit-
ment made by any person other than our Technical
Manufacturer:
Address:
We declare that the product: WASHER
Brand:
Model:
Is in conformity with the provisions of the
modifications of the same and the corresponding incorporation into National Law. Is in conformity with the
requirements of the following European Directives:
2006/42/UE (Machinery directive)
2014/34/UE (ATEX)
as well as its modifications and updates, and provisions according to the national legislative code of the
destination country.
Is in conformity with the requirements of the following European Directives, and has used the following
technical standards for its construction:
EN 12100:2010 "Safety of machinery – General principles for design – Risk assessment and risk reduction"
EN 12921-1:2005+A1:2010 "Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours –
Common safety requirements."
EN 12921-3:2005+A1:2008 "Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours –
Safety of machines using flammable cleaning liquids"
EN ISO 13849-1:2008+AC:2009 "Safety of machinery – Parts of control systems linked to safety – General design principles"
EN 1127-1:2011 "Explosive atmospheres - Prevention of explosion and protection against explosion – Fundamental concepts
and methodology."
In Vitoria-Gasteiz, on 01/05/2021

13. CONDITIONS OF WARRANTY

14. DECLARATION OF CONFORMITY

SAGOLA S.A.U.
Calle Urartea, 6 · 01010 VITORIA-GASTEIZ (Álava) ·
SAGOLA
COMPACT 220
Directive on machines (Directive 2006/42/UE) including
II 3 GD
Technical Manager
Enrique Sánchez Uriondo
Service personnel.
Technical Service Personnel
(Tel. 34 945 214 150 - Fax 34 945 214 147)
In the case of any malfunction during the peiod of
GUARANTEE, enclose the guarantee certificate with
the apparatus and deliver it to the nearest Technical
Service or get in contact with the factory.
Any other claims against the supplier beyond those
expressed above are excluded, especially regarding
indemnification for damages. This is equallu applica-
ble to damages arising during consultation, trainin-
gand demostration.
The provision of services during the Guarantee
period will not cause this period to be extended as a
consequence.
No gurantee claims shall be acepted for equipament
for which SAGOLA has noduly completed guarantee
certificate coupon in its files.
Technical modifications may be made without notice.
- 20 -
SPAIN