Guarantee Conditions; Declaration Of Conformity - Sagola S25 Manual De Instrucciones

This guarantee has been manufactured with strict
precision an d has been subjected to a large
number of controls before it left the factory.
The GUARANTEE is for 2 years, counted as of the
date of purchase, which will be indicated by the
establishment where the apparatus is purchased in
the place provided for this purpose, together with its
stamp.
The GUARANTEE covers all nanufacturind defects
which will be repaired free of charge. Neverthe-
less, all those malfunctions which are the result of
the incorrect use of the apparatus, such as incorrect
connections, breakage due to the apparatus being
dropped or similar, normal wear and tear and in
general, any deficiency not attributable to manufac-
ture.
Likewise, the GUARANTEE will became invalid
should be abserved that the apparatus has been
handled by persons other than our Technical Servi-
ce personnel.
This GUARANTEE does not support any commitment
made by any person other than our Technical Servi-
ce personnel.
According to the directive 89/392/EEC, Annex II, Section A, dated 14th of June 1989
Manufacturer:
Address:
We declare that the product: WASHER GUN
Brand:
Model:
Is in conformity with the provisions of the
modifications of the same (91/368/EEC and 93/68/EEC) and the corresponding incorporation into National
Law.
Is in conformity with the requirements of the following European Directives
98/37/EEC of 22nd of January 1998 (MACHINE SAFETY)
94/9/EEC (ATEX) of 23rd March 1994
as well as its modifications and updates, and provisions according to the national legislative code of the
destination country.
Is in conformity with the requirements of the following European Directives, and has used the following
technical standards for its construction:
EN 12100:2010 "Safety of machinery – General principles for design – Risk assessment and risk reduction"
EN 12921-2005+A1:2010 "Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Common safety requirements."
EN 12921-3:2005+A1:2008 "Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Safety of machines using flammable
cleaning liquids"
EN ISO 13849-1:2008+AC:2009 "Safety of machinery – Parts of control systems linked to safety – General design principles"
EN 1127-1:2011 "Explosive atmospheres - Prevention of explosion and protection against explosion – Fundamental concepts and methodology."
EN 13463-1:2009 "Non-electrical equipment for use in potentially explosive atmospheres – Part 1: Basic method and requirements"
Complete technical documentation and product service instructions are available in the original version, as
well as in the community languages of the users.
In Vitoria-Gasteiz, on 01/04/2016

11. GUARANTEE CONDITIONS

12. DECLARATION OF CONFORMITY

SAGOLA S.A.
Calle Urartea, 6 · 01010 VITORIA-GASTEIZ (Álava) · SPAIN
SAGOLA
S25
Directive on machines (Directive 89/392/EEC) including
II 3 G
Technical Service Personnel
(Tel. 34 945 214 150 - Fax 34 945 214 147)
In the case of any malfunction during the peiod of
GUARANTEE, enclose the guarantee certificate with
the apparatus and deliver it to the nearest Technical
Service or get in contact with the factory.
Any other claims against the supplier beyond those
expressed above are excluded, especially regar-
ding indemnification for damages. This is equallu
applicable to damages arising during consultation,
trainingand demostration.
The provision of services during the Guarantee
period will not cause this period to be extended as
a consequence.
No gurantee claims shall be acepted for equipa-
ment for which SAGOLA has noduly completed
guarantee certificate coupon in its files.
Technical modifications may be made without
notice.
General Director
- 18 -