Guarantee Conditions; Declaration Of Conformity - Sagola DOBLE 250 Manual De Instrucciones

This guarantee has been manufactured with strict
precision an d has been subjected to a large number
of controls before it left the factory.
The GUARANTEE is for 2 years, counted as of the date
of purchase, which will be indicated by the establishment
where the apparatus is purchased in the place provided
for this purpose, together with its stamp.
The GUARANTEE covers all nanufacturind defects
which will be repaired free of charge. Nevertheless, all
those malfunctions which are the result of the incorrect
use of the apparatus, such as incorrect connections,
breakage due to the apparatus being dropped or similar,
normal wear and tear and in general, any deficiency
not attributable to manufacture.
Likewise, the GUARANTEE will became invalid should
be abserved that the apparatus has been handled by
persons other than our Technical Service personnel.
This GUARANTEE does not support any commitment
made by any person other than our Technical Service
personnel.
Manufacturer: SAGOLA S.A.U.
Address: Calle Urartea, 6 · 01010 VITORIA-GASTEIZ (Álava) · SPAIN
We declare that the product: WASHER GUN
Brand: SAGOLA
Model: DOBLE 250
Is in conformity with the provisions of the
modifications of the same and the corresponding incorporation into National Law.
Is in conformity with the requirements of the following European Directives:
2006/42/UE (Machinery directive)
2014/34/UE (ATEX) (Explosive atmospheres directive)
as well as its modifications and updates, and provisions according to the national legislative code of the
destination country.
Is in conformity with the requirements of the following European Directives, and has used the following
technical standards for its construction:
EN 12100:2010 "Safety of machinery – General principles for design – Risk assessment and risk reduction"
EN 12921-1:2005+A1:2010 "Machines for surface cleaning and pre-treatment of industrial items using liquids
or vapours – Common safety requirements."
EN 12921-3:2005+A1:2008 "Machines for surface cleaning and pre-treatment of industrial items using liquids
or vapours – Safety of machines using flammable cleaning liquids"
EN ISO 13849-1:2008+AC:2009 "Safety of machinery – Parts of control systems linked to safety – General
design principles"
EN 1127-1:2011 "Explosive atmospheres - Prevention of explosion and protection against explosion – Fundamental
concepts and methodology."
In Vitoria-Gasteiz, on 01/07/2021

13. GUARANTEE CONDITIONS

14. DECLARATION OF CONFORMITY

Directive on machines (Directive 2006/42/UE) including
- 34 -
Technical Service Personnel
(Tel. 34 945 214 150 - Fax 34 945 214 147)
In the case of any malfunction during the peiod of
GUARANTEE, enclose the guarantee certificate with
the apparatus and deliver it to the nearest Technical
Service or get in contact with the
Any other claims against the supplier beyond those
expressed above are excluded, especially regarding
indemnification for damages. This is equallu applicable
to damages arising during consultation, trainingand
demostration.
The provision of services during the Guarantee period
will not cause this period to be extended as a
consequence.
No gurantee claims shall be acepted for equipament
for which SAGOLA has noduly completed guarantee
certificate coupon in its files.
Technical modifications may be made without notice.
II 3 GD
Technical Manager
Enrique Sánchez Uriondo
factory.