Tabla de contenido
Publicidad
LOCATING YOUR DEVICES VIA BLUETOOTH
SELECT BLUETOOTH AS THE INPUT SOURCE BY PUSHING THE SOURCE/
WAKE BUTTON. BLUETOOTH IS NOW ACTIVATED, WITH A FLASHING RED
LED IF NO DEVICE IS CONNECTED, AND A SOLID RED LED IF A DEVICE IS
CONNECTED.
THE LOUDSPEAKER WILL NOW AUTOMATICALLY SEARCH FOR PAIRED
DEVICES FOR THREE MINUTES, AND THE LED WILL RAPIDLY FLASH RED
DURING THE SEARCH. THE KILBURN WILL LOCATE DEVICES WITHIN RANGE
THAT HAVE PREVIOUSLY BEEN CONNECTED AND WILL CONNECT THEM
AUTOMATICALLY.
IF NO DEVICES ARE LOCATED WITHIN THREE MINUTES, THE LOUDSPEAKER
WILL REVERT TO STANDBY STATUS (THERE IS MORE INFORMATION ON THE
STANDBY MODES ON PAGE 022).
IF THE PAIR BUTTON IS PUSHED WHILE BLUETOOTH IS SELECTED AS
THE AUDIO SOURCE, THE LOUDSPEAKER WILL PERFORM A NEW SEARCH
FOR THREE MINUTES AFTERWARDS, DURING WHICH TIME, THE LED WILL
RAPIDLY FLASH RED.
NOTES:
• THE AUTO CONNECTION FUNCTION WILL NOT WORK IF THE KILBURN IS
• IF A SEVENTH DEVICE IS CONNECTED, DEVICE
• ALWAYS START BLUETOOTH IN YOUR SMARTPHONE/COMPUTER FIRST,
018.
TURNED OFF VIA THE MAIN POWER SWITCH AT THE TOP OF THE UNIT
MEMORISED.
AND THEN START THE LOUDSPEAKER TO RECEIVE AN AUTO CONNECTION.
A
WILL NO LONGER BE
Publicidad
Tabla de contenido
