Intended Use - Ryobi P620 Manual De Utilización

EN
FR DE ES IT NL
Safety, performance, and dependability have been given
top priority in the design of your speed sprayer.

INTENDED USE

The speed sprayer is intended to be used only by
adults who have read and understood the instructions
and warnings in this manual, and can be considered
responsible for their actions.
The speed sprayer can be used on the following materials:
1. Fencing
2. Furniture
3. Garden furniture
4. Pesticides
5. Exterior walls
6. Radiators
7. Garage doors
8. Railings
9. Summer houses
10. Stables
11. Outbuildings
12. Interior walls
Do not use the product in any way other than those stated
for intended use.
WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
Save all warnings and instructions for future
reference.
DESCRIPTION
1. Liter quick-lock container
2. Round tip
3. Fan tip
4. Storage hook
5. Lubricant bottle
6. Switch trigger
7. Cleaning brush
8. Battery pack (not included)
9. Replacement atomizer valve assembly
10. Depress latches to release battery pack
11. Lock
12. Unlock
13.
14.
15.
paint spray from horizontal to vertical
PT DA SV FI NO RU
English
PL CS HU RO LV LT
16. Horizontal spray direction
17. Vertical spray direction
18. Correct Spray Technique
19. Incorrect Spray Technique
20. Spray tip
21. Atomizer valve assembly
22. Locking nut
23.
24. Spring
25. Piston
26. Sprayer housing
27.
28. Place Line Of Lubricant
29. Viscosity Cup
30. Measuring Cup
31. Handle, insulated gripping surface
OPERATION
BATTERY PROTECTION FEATURES
This product will accept RYOBI One+ 18 V lithium-ion
battery packs and RYOBI One+ 18 V nickel-cadmium
battery packs.
RYOBI 18 V lithium-ion batteries are designed with
features that protect the lithium-ion cells and maximize
battery life. Under some operating conditions, these
built-in features may cause the battery and the tool it is
powering to act differently from nickel-cadmium batteries.
During some applications, the battery electronics may
signal the battery to shut down, and cause the tool to stop
running. To reset the battery and tool, release the trigger
and resume normal operation.
NOTE: To prevent further shut down of the battery, avoid
forcing the tool.
If releasing the trigger does not reset the battery and tool,
the battery pack is depleted. If depleted, the battery pack
will begin charging when placed on the lithium-ion charger.
TO INSTALL/REMOVE BATTERY PACK
Always remove battery pack from your tool when you
when not in use. Removing battery pack will prevent
accidental starting that could cause serious personal
To install:
Place the battery pack in the tool. Align the raised rib
on the battery pack with groove in the battery port.
1
ET HR SL SK BG UK
WARNING
TR EL