Olympus FL-700WR Instrucciones página 55

Setting the fi ring angle (ZOOM)
Press the ZOOM button to highlight ZOOM. Then, turn the dial to adjust the
setting.
• When you select A (auto), an automatic setting takes effect. The automatic
setting ranges from 12 mm to 75 mm.
• When the fl ash window is adjusted for bounce fl ash photography, you cannot
select A (auto).
• When you select M (manual), you can set a fi ring angle from 12 mm to 75 mm.
Press the OK button.
Setting the fl ash intensity (RATIO) in the X-RCV mode
Press the a button to highlight RATIO. Then, turn
the dial to select a setting.
• You can set a fl ash ratio from 1/1 to 1/128.*
*1 You can select 1/2 EV or 1/3 EV for the adjustment
increment. (P. 60)
*2 On the scale display, t is the current selection. u is the
previous setting.
Press the OK button.
Setting the communication group/channel in the RCV mode
• Select the same group and the same channel that
you set on the wireless commander/commander
fl ash.
Press the MODE button. Then, press HI on the
arrow pad to highlight GROUP (communication
group). Turn the dial to adjust the setting.
• You can select Group A, Group B, or Group C.
Press the OK button.
Press the MODE button. Then, press HI on the arrow pad to highlight CH
(communication channel). Turn the dial to adjust the setting.
• You can select a channel from 1 to 15.
Press the OK button.
MODE
M
1
RATIO
1/8
Scale display*
MODE
GROUP
A
ZOOM G/CH
1/16
A
75
A11
mm
1/8
1/4
2
ZOOM G/CH
A
75
mm
CH
1
55
EN