Preparing The Remote Control; Installing The Sound Bar - Yamaha SR-C20A Guia De Inicio Rapido

Preparing the remote control

Remove the battery insulating strip before attempting to use the
remote control.
Battery insulating strip

NOTE
A Lithium battery (CR2025) has already been inserted into the remote
control.
Operating range of the remote control
Use the remote control within the range shown in the following
illustration:
Remote control
sensor
Within 6 m (20 ft)

Installing the sound bar

Installed on a TV stand
Controls
Wall-mounted
Controls
Refer to the User Guide. When installation
and all connections are complete, power off
sound bar and hold down BASS EXT on the
sound bar's remote control for at least five
seconds. The frequency characteristics are
configured for wall mount installation.
User Guide
5
En