KALLISTA P22130 Guia De Instalacion página 5

Cover Ring
Stone Knob
Cap
Cover Ring
Washer
Screw
Washer
Screw
Handle
Handle
Cone
O-Ring
Cone
O-Ring
Crystal Knob
3. Install the Handle Inserts
P22550 or P22551 (Purchased Separately)
Turn the handle to the "Off" position.
Unscrew the cover ring and remove the cap from the cover ring.
Remove the screw and washer.
Remove the handle.
Remove the cone and O-ring (the O-ring may stay inside the
cone).
Install the stone or crystal knob over the bonnet.
Reinstall the O-ring and cone.
Reinstall the handle in the proper orientation.
Secure the handle with the washer and screw.
Install the cover ring.
Orient the text on the cap correctly and press the cap into place in
the cover ring.
Repeat for the second handle.
Kallista 5 1008410-2-B