Emerson LED PRO Serie Manual Del Usuario página 14

9. How to Wire Your Ceiling Fan
9.3
Securely connect the Fan Motor Black Wire and Blue
Wire to the Supply Black (Hot) Wire using Wire
Connector Supplied (Figure 18).
9.4
After Connections have been made, turn Wires upward
and carefully push Wires into the Outlet Box, with the
White and Green Wires on one side of the Outlet
Box and Black Wires on the other side of the Outlet Box
(Figure 19).
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan until blades are in place. Noise and fan damage
could result.
HANGER BALL/DOWNROD ASSEMBLY SHOWN
LISTED WIRE
CONNECTOR
SUPPLY
BLACK (HOT)
BLUE
FAN WIRE
FAN MOTOR
BLACK FAN WIRE
Figure 18
HANGER BALL/DOWNROD ASSEMBLY SHOWN
WHITE WIRES
TWO BLACK WIRES
AND ONE BLUE WIRE
GREEN WIRES
Figure 19
14
(Continued)
U.L. Model No.: 52-ANT