3M PELTOR WS LiteCom Plus Manual Del Usuario página 16

EN
3M™ PELTOR™ M171/2 Wind shield for level-dependent
microphones
Effective against wind noise; enhances life span and protects
the microphones. One pair per pack.
3M™ PELTOR™ ACK081 Battery
Supplied as standard with product.
NOTE: Use the following battery in this product: 3M™
PELTOR™ ACK081 charged with cable 3M™ PELTOR™
AL2AI connected to a 3M™ PELTOR™ FR08 (power supply).
3M™ PELTOR™ AL2AI Charging cable
USB cable connecting to ACK081.
3M™ PELTOR™ FR08 Power supply
Power supply for AL2AI/ACK081.
3M™ PELTOR™ FL5602 External PTT
Push-To-Talk button with connection cable for external control
of transmission with the built-in communication radio.
3M™ PELTOR™ FL6BT Connecting cable
With 3.5 mm mono connector for use with communication radios.
3M™ PELTOR™ FL6BS Connecting cable
With 2.5 mm mono connector for use with communication radios.
3M™ PELTOR™ FL6BR Connecting cable
With Peltor J11 connector (type Nexus TP-120) for use with a
Peltor adapter and an external communication radio. Contact
your 3M Peltor dealer for information.
FCC AND ISED INFORMATION
FCC AND ISED INFORMATION
This device contains licence-exempt transmitter(s)/
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation,Science and Economic
receiver(s) that comply with Innovation,Science and Economic
Development Canada's licence-exempt RSS(s) Operation is
Development Canada's licence-exempt RSS(s) Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesirable operation.
NOTE: This device complies with part 15 of the Rules.
Operation is subject to the following two conditions:(1) This
device may not cause harmful, and (2)this device must accept
any interference received, including interference that may
cause usdesired operation.However, there is no guarantee that
interference will not occur in a particular installation. If this device
does cause harmful interference, which can be determined by
turning the device off and on, the user is encouraged to try to
correct the interferenceby one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation distance between the two interfering
devices.
• Consult 3M Technical Services.
7
CAN ICES-3 (B)/NMB-3(B)
WARRANTY AND LIMITATION OF LIABILITY
NOTE: The following statements do not apply in Australia and
New Zealand. Consumers should rely on their statutory rights.
WARRANTY: In the event any 3M Personal Safety Division
product is found to be defective in material, workmanship, or not
in conformity with any express warranty for a specific purpose,
3M's only obligation and your exclusive remedy shall be at 3M's
option, to repair, replace, or refund the purchase price of such
parts or products upon timely notification of the issue by you
and substantation that the product has been stored, maintained,
and used in accordance with 3M's written instructions.
EXCEPT WHERE PROHIBITED BY LAW, THIS WARRANTY
IS EXCLUSIVE AND IS IN LIEU OF ANY EXPRESS OR
IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE OR OTHER WARRANTY
OF QUALITY, OR THOSE ARISING FROM A COURSE OF
DEALING, CUSTOM, OR USAGE OF TRADE, EXCEPT OF
TITLE AND AGAINST PATENT INFRINGEMENT. 3M has no
obligation under this warranty with respect to any product that
has failed due to inadequate or improper storage, handling, or
maintenance; failure to follow product instructions; or alteration or
damage to the product caused by accident, neglect, or misuse.
LIMITATION OF LIABILITY: EXCEPT WHERE PROHIBITED BY
LAW, IN NO EVENT SHALL 3M BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
LOSS OR DAMAGES (INCLUDING LOST PROFITS) ARISING
FROM THIS PRODUCT, REGARDLESS OF THE LEGAL
THEORY ASSERTED. THE REMEDIES SET FORTH HEREIN
ARE EXCLUSIVE.
NO MODIFICATION: Modifications to this device shall not be
made without the written consent of 3M Company.
Unauthorized modifications may void the warranty and the
user's authority to operate the device.
To properly dispose of the battery, follow local solid waste
disposal regulations. Many rechargeable batteries are required
to be recycled by local, state/province, and national laws. To
properly recycle/dispose of the battery or battery pack, always
follow local solid waste disposal regulations. Additionally, in
the United States and Canada, 3M Company is partnering
with Call2Recycle (RBRC) to provide recycling service to
you to help ensure that the rechargeable batteries within our
products are recycled properly. To assist you in using this
service call the Call2Recycle battery recycling information
help line at 1-800-8-BATTERY (1-800-822-8837) or consult
Call2Recycle's battery recycling guidance online at "http://
www.call2recycle.org" www.call2recycle.org.