UK
READ THESE INSTRUCTIONS CAREFULLY BEFORE
USING THE PUSHCHAIR. KEEP THEM IN A SAFE
PLACE, YOU MAY NEED TO REFER TO THEM AGAIN.
YOUR CHILD'S SAFETY COULD BE AFFECTED IF YOU
DO NOT FOLLOW THESE INSTRUCTIONS.
This pushchair is for newborn babies and infants up to 15 kg.
HOW TO ASSEMBLE THE PUSHCHAIR
Open the pushchair (Fig. 1)
Unlock the automatic safety lock on the right-hand side.
Raise the pushchair handle with both hands until the frame is fully extended and locked in the
open position until you hear a "click" (Fig.2).
Fitting the rear wheels (Fig. 3)
Fit the rear wheel support bar into the downward tubes for the rear wheels (A).
Next, fit the rear wheels into the support axle for the rear wheels (B).
Fix the wheel in place with the clip, than place the protective cap over this and finally the
decorative cover (C).
Fitting and locking the front wheels (Fig. 4)
Insert the front support into the front wheel block with the brake lever facing upwards, until you
hear that they have locked in place (A).
To lock the front wheels in place, lift the brake lever upwards. To unlock the front wheels, press
the lever downwards (B).
FITTING THE FRONT BUMPER BAR (Fig. 5)
Insert the bumper bar into the joints until it locks.
Warning: do not let your child sit or stand on the bumper bar.
How to remove the bumper bar (Fig. 6)
Press the buttons underneath the bumper bar, pulling it towards you at the same time, to remove
the bumper bar.
HOW TO ADJUST THE BACKREST (Fig. 7)
To recline the backrest, firmly lift the backrest adjustment handle and with the other hand move
the backrest into the desired position.
To return it to the sitting position, push the backrest forward into the desired position.
HOW TO ADJUST THE LEG-REST (Fig. 8)
To lower the leg-rest, press the buttons to either side of the leg-rest and lower it.
To lift the leg-rest, simply raise it.
WARNING: do not let your child sit or stand on the leg-rest.