5-Point Harness - Graco 6900 Serie Manual Del Propietário

5.1.2 5-Point Harness

1. Depress the harness adjustment button
under the seat flap
straps out to loosen the harness .
2. Behind seat, remove the ends of the two
shoulder straps from the metal junction
plate .
3. From front, pull straps through the
harness slots and then reinsert them
through the appropriate slots.
4. Behind seat, push both shoulder
straps UNDER owner's manual pocket
and out the bottom.
5. Reassemble the strap ends onto the
metal junction plate
appropriate instructions for a smaller
or larger baby on the following page.
6. SAFETY CHECK:
After the harness has been completely reinstalled,
a) CHECK that harness straps are not twisted in front or back.
b) CHECK that straps are secure by pulling on them.
. Pull the shoulder
. Follow the
26
Harness adjustment button