Epson SC-R5000 Serie Instrucciones De Seguridad página 6

The curing heater, heaters and media edge plate may be hot; observe all
necessary precautions.
Failure to observe the necessary precautions could result in burns.
Notes on the Power Supply
To prevent ground leak accidents, connect to a grounded (earthed) outlet.
Connecting to anything other than a grounded outlet could result in electric shock or fire.
Make sure the blades on the plug are inserted completely into the power outlet.
An electric shock or fire could occur.
Unplug the plug regularly and clean between the blades and around the base of the blades.
If the plug is plugged in for an extended period of time, dust collects around the base of the
blades and a short circuit or fire could occur.
When unplugging the plug, grip the plug itself; do not pull the power cable.
If the cable is damaged or the plug is deformed, an electric shock or fire could occur.
Do not insert or unplug the plug with wet hands.
An electric shock could occur.
Use only the type of power source indicated on the printer's label.
An electric shock or fire could occur.
Do not use the plug if any foreign objects such as dust have adhered to the plug.
An electric shock or fire could occur.
Do not use any other power cables except for the cable supplied with the printer. Also, do
not use the power cable supplied with the printer for any other devices.
An electric shock or fire could occur.
Do not use the power cable if it is damaged.
An electric shock or fire could occur. If the power cable is damaged, contact Epson Support.
Note the following points to avoid damaging the power cable.
❏ Do not modify the power cable.
❏ Do not place anything heavy on the power cable.
❏ Do not bend, twist, or pull forcefully on the power cable.
❏ Do not route the power cable near heaters.
6 6
Do not reach inside the curing heater.
Failure to observe the necessary precautions could result in burns.
!
!
Caution
Warning