Troubleshooting - SPORTSTECH CX625 Manual Del Usuario

Ocultar thumbs Ver también para CX625:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
PROBLEM
The elliptical trainer wobbles when in use.
There is no display on the computer console.
There is no heart rate reading or heart rate
reading or is erratic / inconsistent.
The elliptical trainer makes a squeaking noise
when in use.

TROUBLESHOOTING

Turn the rear stabilizer end cap on the rear
stabilizer as needed to level the elliptical
trainer.
Remove the computer console and verify the
wires that come from the computer console are
properly connected to the wires that come from
the front post.
Make sure that the wire connections for the
hand pulse sensors are secure.
To ensure the pulse readout is more precise,
please always hold on to the handlebar grip
sensors with two hands instead of just with one
hand only when you try to test your heart rate
figures.
Gripping the hand pulse sensors too tight. Try to
maintain moderate pressure while holding onto
the hand pulse sensors.
The bolts may be loose on the elliptical trainer,
please inspect the bolts and tighten the loose
bolts.
62
SOLUTION

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido