Call Waiting Caller Id; Answering System Set Up; Voice Instructions; Answering System - GE 27958 Guía De Usuario

C W
ALL AITING
Provided you subscribe to Caller ID with Call Waiting service from your
phone company, you may see who is calling when you hear the call
waiting tone in the receiver. The CID information appears in the display
after you hear the tone.
Press FLASH/PROGRAM to put the current call on hold and answer the
incoming call. Press FLASH/PROGRAM again when you want to return to
the first call.
IMPORTANT: In order to use all of the features of this unit, you must
subscribe to either the standard Name/Number Caller ID Service or Call
Waiting Caller ID Service. To know who is calling while you are on the phone,
you must subscribe to Call Waiting Caller ID Service.
A S
NSWERING
This section shows you how to set up your answering system to receive
incoming calls. Before you begin the setup, you must turn on the

answering system.

• Press the ANSWERER ON/OFF button to turn the answering system on and
off. The new messages indicator flashes when you have new messages.
NOTE: The display shows "ANSWER OFF " when the answering system is off.
The default status is on.
V I
OICE NSTRUCTIONS
If you need additional assistance, press the MEMO button on the base and
follow the voice instructions.
A S
NSWERING
R
ECORDING THE
For best results when recording, you should be about nine inches from the
microphone, and eliminate as much background noise as possible.
1. Make sure the answering system is ON.
32
C ID
ALLER
S U
YSTEM ET
O
YSTEM PERATION
O A
UTGOING
P
NNOUNCEMENT