Call Waiting Caller Id; Answering System Set Up; Voice Instructions; Answering System Operation - GE 27958 Guia Del Usuario

C W C
ALL AITING ALLER
Provided you subscribe to Caller ID with Call Waiting service from your
phone company, you may see who is calling when you hear the call
waiting tone in the receiver. The CID information appears in the display
after you hear the tone.
Press flash/program to put the current call on hold and answer the
incoming call. Press flash/program again when you want to return to the
first call.
IMPORTANT: In order to use all of the features of this unit, you must
subscribe to either the standard Name/Number Caller ID Service or Call
Waiting Caller ID Service. To know who is calling while you are on the phone,
you must subscribe to Call Waiting Caller ID Service.
A S
NSWERING YSTEM
This section shows you how to set up your answering system to receive
incoming calls. Before you begin the setup, you must turn on the
answering system.
• Press the answerer on/off button to turn the answering system on and
off. The new messages/in use indicator turns on when you have new
messages.
NOTE: The display shows "ANS.ON" or "ANS.OFF" to show the status of the
answering system.
V I
OICE NSTRUCTIONS
If you need additional assistance, press the memo button on the base and
follow the voice instructions.
A S
NSWERING YSTEM
R O
ECORDING THE UTGOING
For best results when recording, you should be about nine inches from the
microphone, and eliminate as much background noise as possible.
All manuals and user guides at all-guides.com
ID
S U
ET P
O
PERATION
A
NNOUNCEMENT
31