Package Contents - Kobalt K7343 Manual Del Usuario

PACKAGE CONTENTS

NOTICE: To simplify handling and to minimize any damage that may occur during shipping, the
router table comes partially assembled. Separate all the parts from the packaging materials and
check each part against the package contents list in order to ensure that all parts have been
included. Do this before discarding any of the packaging material.
Carefully inspect the items to ensure that no breakage or damage has occurred during shipping.
If any of the items in the parts list is missing, call customer service at 1-888-356-2258.
WARNING: If any parts are missing, DO NOT attempt to assemble, install, or use the router
table until the missing parts have been found or replaced and the router table has been properly
and correctly assembled according to this owner's manual.
Part list for the router table
PARTS FOR ROUTER TABLE
PARTS FOR MOUNTING ROUTER
PARTS FOR FENCE
DESCRIPTION
Router table surface assembly
Table leg
Short pan-head screw, 3 washers
and nut for installing the leg to the table
Long pan-head screw, and a washer
DESCRIPTION
Flat-head screw for attaching the router
to the mounting plate of the table
Level screw
DESCRIPTION
Fence assembly
M6x26 bolt, washer and clamping knob for locking
the fence to the table (pre-installed on the fence)
M6x40 bolt, washer and clamping knob for locking
the fence to the table (pre-installed on the fence)
10
QUANTITY
1
2
4
4
QUANTITY
3
4
QUANTITY
1
1
1
kobalttools.com