Package Contents; Switch Installation; Rack Installation - D-Link DGS-1016D Guía De Introducción

About This Guide
The D-Link DGS-1016D/1024D 16/24-Port Gigabit
Desktop Switch is a stand-alone plug-and-play
device. This Quick Installation Guide gives step-by-
step instructions for setting up the device. The model
you have purchased may appear slightly different
from the images shown in this guide. For more
detailed information about the switch, installation
process, making network connections, and technical
specifications, please refer to the User Manual or visit
http://www.dlink.com

Package Contents

These are the items included with your purchase:
• D-Link DGS-1016D 16-Port or DGS-1024D
24-Port 10/100/1000BASE-T Gigabit
Ethernet Switch
• AC power cord
• Four rubber feet
• Screws and two mounting brackets
• Quick Installation Guide
• Power cord retainer
• Tie wrap
If any of the above items are missing, please contact
your D-Link reseller for replacement.

Switch Installation

The DGS-1016D/1024D can easily be mounted in an
EIA standard size 19-inch rack which can be placed
in a wiring closet with other equipment or placed on a
desktop or shelf.
Desktop or Shelf Installation
When installing the switch on a desktop or shelf, use
the rubber feet provided. Position and apply the rubber
feet to the bottom corners of the DGS-1016D/1024D
switch.

Rack Installation

To install in a rack, attach the mounting brackets to
the switch's side panels (one on each side) and
secure them with the screws provided. Then, use the
hardware provided with the equipment rack to mount
the switch in the rack.
Installing a Power Cord
Retainer
Installation of a power cord retainer is recommended
to prevent accidental removal of the AC power cord.
A. Insert a tie wrap with the rough side facing down
into the hole below the power socket.
Insert tie wrap
1 1