Dash Disassembly - Metra 99-7349B Instrucciones De Instalación

1. Unclip and remove the panel (and
speaker if equipped) from above the
radio panel. (Figure A)
2. Unclip and remove the radio/climate
control trim panel. (Figure B)
2

DASH DISASSEMBLY

(Figure A)
(Figure B)
3. Remove (4) Phillips screws securing the
climate control panel. Slide the panel
out and set to the side. (Figure C)
4. Remove (4) Phillips screws securing the
radio. Slide the radio out, then unplug
and remove the radio. (Figure C)
5. Remove (4) screws securing the hazard
switch assembly from the radio, then
secure the assembly to the 95-7349B
radio trim panel using the same factory
screws. (Figure D)
Continue to Kit Assembly
Step 4
Step 3
(Figure C)
(Figure D)
|
1.800.221.0932 MetraOnline.com
Step 4
Step 3