Kit Assembly - Metra 99-7349B Instrucciones De Instalación

1. Secure the radio brackets to the radio
using the screws supplied with the radio.
(Figure A)
2. Clip the radio trim panel over the radio/
bracket assembly. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash. Metra
recommends using the proper mating
adapters from Metra or AXXESS. Test the
radio for proper operation.
4. Secure the radio assembly to the dash
using the factory screws.
5. Reassemble the dash in reverse order of
disassembly.

KIT ASSEMBLY

(Figure A) (Figure B)
3
REV. 5/25/2018 INST95-7349B