PRASTEL EASYKA Manual Del Usuario página 41

EASYKA -
EASYBKA
9. Changing the backlight and LED behavior
1) Enter Programming Mode
2) Press "6" to enter Menu 6,
the Mode LED will flash
green.
3) Construct and enter a
code using the following
instructions:
the first digit is
indicating the backlight
and Led option, the
second digit is the option number for the backlight mode that you
wish to select (see the following table). The third and fourth digits
are 0.
4) System returns to Transmit Mode, you will hear one beep, the
Door LED will turn off and the Mode LED will turn green.
WARNING: In modes 2 and 3, backlight is actually turned off or
dimmed 10 seconds after programming.
Backlight and LED mode
LED active, backlight OFF
LED active, backlight ON (default)
LED and backlight OFF, both activated on any key
press for ten seconds.
LED active / backlight Dimmed, backlight
activated on any key press for ten seconds.
ENGLISH ISEASYKA_07_06.doc
5,
Option number
0
1
2
3
41