PRASTEL EASYKA Manual Del Usuario página 43

EASYKA -
EASYBKA
11. Changing the Auxiliary Code
The Auxiliary Code is mainly used as a method to quickly test the
Auxiliary Relay during installation. The Default Factory Setting for the
Auxiliary Code is 0852.
When the first user is added to the controller, the default Auxiliary Code
will automatically be deleted, ready for a new Auxiliary Code to be re-
entered.
1. Enter Programming Mode.
2. Press "2" to enter Menu 2. The
Mode LED will turn orange.
3. Insert the new "Auxiliary Code".
4. The EASYKA returns to
Normal Mode: you will hear
three beeps. The Door LED will
turn off and the Mode LED will
turn green.
NOTE
Auxiliary Code does not
work in Secure Mode and only works when the Auxiliary Mode
is 0,1,8 or 9.
Code 0000 will erase and deactivate the Auxiliary Code.
12. Changing the Programming Code
1. Enter Programming Mode.
2. Press "3" to enter Menu 3: the Mode
LED will turn green.
3. Insert the new "Programming Code".
4. The EASYKA returns to Normal Mode:
the Door LED will turn off and the
Mode LED will turn green.
ENGLISH ISEASYKA_07_06.doc
GREEN
ORANGE GREEN
GREEN
GREEN
GREEN GREEN
GREEN
43