PRASTEL EASYKA Manual Del Usuario página 42

EASYKA -
EASYBKA
10. Changing the Open Code
The Open Code is mainly used as a method to quickly test the Lock
Strike Relay during installation.
The Default Factory Setting for the Open Code is 2580.
When the first user is added to the controller, the default Open Code will
automatically be deleted, ready for a new Open Code to be re-entered.
1. Enter Programming Mode
2. Press "1" to enter Menu 1. The
Mode LED will turn red.
3. Insert the new "Opening Code".
4. The EASYKA returns to Normal
Mode: the Door LED will turn off
and the Mode LED will turn
green.
NOTE
Open Code does not function in Secure Mode.
Wrong entries will return the controller to Normal Mode.
Code 0000 will erase and deactivate the Open Code.
ENGLISH ISEASYKA_07_06.doc
GREEN
GREEN
RED
GREEN
42