General Description; Kit Composition - Cebora 436.00 Manual De Instrucciones

2

GENERAL DESCRIPTION

This instruction manual refers to Gas Flow Control Kit Item 436.00 and has been prepared to instruct
staff in charge of installing, operating and maintaining the welding machine. It must be carefully stored in
a place known to the various people involved, and consulted whenever clarification is required. It must be
used when ordering parts and kept for the machine's entire operational life-span.
Inappropriate use of the equipment can damage the equipment and endanger the operator. Do not use the
functions described in this manual until you have read and understood all parts of the following
documents:
- this instruction manual;
- Instruction Manuals of equipment making up the Welding System (e.g.: power source, wire
feeder, control panel, including manuals for any options).
3

KIT COMPOSITION

The Gas Flow Control Kit, item no 436.00 is made up of the elements shown in fig. 1.
Pos.
1 Flow control board
2 Pressure regulator
3 Solenoid and flow sensor unit
4 CAN bus connector
5 Solenoid connection
6 Solenoid connection
7 Power connection
8 Power connection
9 Power connection
3300121
WARNING
Description
9
8
7
6
5
1
2
3
4
Fig. 1
Code Q.ty
5602635 1
5710339 1
5605773
1
5587391 1
5587393 1
5587397 1
5587398 1
5587392 1
5587418 1
EN
11