System Description - Cebora 208-10 Manual De Istrucciones

CEBORA S.p.A.
3

SYSTEM DESCRIPTION.

The Cebora SOUND MIG ROBOT PULSE Welding System is a multi-process system suitable for pulsed
synergic MIG/MAG, MIG/MAG non-pulsed synergic, and conventional MIG/MAG welding, developed
for use in combination with a Welding Robot arm on automated welding systems.
It is made up of a Power Source, which may be equipped with a Cooling Unit, a Wire Feeder, a Control
Panel, and a Robot Interface (fig. 3).
GB
Power Source – Control Panel cable connection (art. 1199.00, l = 5m; art. 1199.20, l = 10m).
1
Power Source – Wire Feeder extension
2
Power Source – Robot Interface signal cable connection (art. 1200, l = 5m).
3
Power Source – Robot Interface CANopen cable (1.5 m long, included in the Robot Interface).
4
5 Robot Control cabinet.
6 Welding wire 15 Kg spool holder (art. 121).
7 MIG Torch.
8 Wire Feeder unit (WF4-R1, art. 1657; WF4-R2, art. 1658).
10 Welding wire sheath (art. 1935.00, l = 1,6 m; art. 1935.01, per Marathon Pack).
21 Power Source (MIG 3840/T art. 287.80; MIG 5040/T art. 289.80).
22 Cooling unit (GR54 o GR52).
24 Power Source Control Panel (full version , art. 208.00; light version, 208.10).
25 Robot Interface (RDI210, art. 210; RAI211, art. 211.00; RAI217, art. 217.00).
26 For RDI210: cable "DeviceNet" (l = 2 m, included in the Interface Robot);
For RAI211 and RAI217: customized multispin wiring.
This equipment may operate independently from the Robot System, or in integrated mode as part of the
Robotic Welding System. In both cases the equipments must be completely cabled and connected
together and to the Robot System.
The integration between the Cebora Welding System and Robot System is determined by the "Robot"
function (par. 4.1):
 "Robot" function active (led AT lit)
 "Robot" function not active (led AT off) = "independent" operation.
NOTE: This Instruction Manual refers to the Control Panel MIG P3, art. 208.10 in Robot applications,
and deals exclusively with "integrated" operation.
3.300.189-B
fig. 3
(WF4-R1 : art. 1197.00, l = 5m; art. 1197.20, l = 10m).
(WF4-R2 : art. 1173.00, l = 5m; art. 1173.20, l = 10m).
= "integrated" operation;
26
04/03/2016