Kohler 22036-CP Instrucciones De Instalación página 11

Faucet Operation
NOTE: Some objects that are clear and certain colors are not detectable by the sensor.
Always use your hand for sensor testing.
Rotate the handle outward to the open position to start water flow. The handle
LED will illuminate to indicate that the sensor is functioning.
Adjust the handle to the desired water temperature.
Wave your hand under the spout to turn OFF the water.
Wave your hand under the spout again to restart the water flow.
If needed, refer to the "Handle LED Adjustment" section for more information.
NOTE: For extended periods of nonuse, return the handle to the closed (upright)
position. The handle LED will turn OFF, indicating that water flow is not available.
Features
Handle LED: Illuminates when the sensor is active.
Power LED: Indicates that there is power to the circuit board.
Automatic shut-off: After 4 minutes of inactivity, the water will automatically
shut OFF.
Sensor override: In the event of power loss, bypass the sensor function by turning
in the override feature on the solenoid valve. The faucet can then be operated
manually.
Kohler Co.
Sensor
Handle LED
Open Position
Manual
Override
11
1384293-2-C