Before You Begin - Kohler 22036-CP Instrucciones De Instalación

Before You Begin

WARNING: When using electrical products, basic precautions should
always be followed, including the following:
DANGER: Risk of electric shock. Connect only to a circuit protected by a
Ground-Fault Circuit-Interrupter (GFCI)*.
WARNING: Risk of electric shock. Grounding is required. A qualified
electrician should make all electrical connections.
WARNING: Risk of electric shock. Disconnect the power before servicing.
WARNING: Risk of injury or property damage. Read all instructions
thoroughly before beginning installation.
CAUTION: Risk of fresh water contamination. This faucet contains back-
siphonage protection. To prevent water contamination, do not remove any
internal components from this faucet.
CAUTION: Risk of property damage. The faucet spout contains a magnet. Do
not allow items susceptible to electromagnetic damage to come into close
proximity to the spout.
CAUTION: Risk of product damage. This product contains sensitive
electronic components. Do not store open containers of chemical or cleaning
products near this product. Cleaning rags or sponges must be rinsed with
fresh water before storage.
IMPORTANT! Do not use a switch-controlled electrical outlet (typically used for
garbage disposals) to provide power to the faucet.
Follow all local plumbing, building, and electrical codes.
Provide a constant unswitched 120 VAC electrical outlet located below the sink
within 5' (1.5 m) of the control box.
For new installations, assemble the faucet to the sink before installing the sink.
For uneven mounting surfaces (such as tile grout lines), apply a suitable sealant
under the faucet. Do not use petroleum-based sealant.
Class 1 laser product: Complies with 21 CFR 1040.10 and 1040.11.
*Outside North America, this may be known as a Residual Current Device (RCD).
Kohler Co. 3
1384293-2-C