Kohler 22036-CP Instrucciones De Instalación página 6

3. Connect the Supplies
Ø 3"
(76 mm)
Min
Supply Hose
CAUTION: Risk of restricted water flow and product damage. Supply hoses
must not be taut, kinked, or twisted during installation. If the supply hoses
must be coiled, maintain an inside diameter (ID) of 3" (76 mm).
Connect the Water Supplies
Connect and tighten the supply hoses to the supply stops.
Place a bucket under the outlet hose.
Turn ON the water supplies.
Flush hot and cold water for 1 minute to remove any debris.
Connect the outlet hose to the solenoid inlet.
Connect the Spray Hose
Remove the protective cap.
1384293-2-C
Solenoid
Outlet Hose
Weight
6
Outlet
Spray
Hose
Inlet
Outlet
Hose
Kohler Co.