Kohler 22036-CP Instrucciones De Instalación página 16

Solenoid Troubleshooting
Symptoms
1. Water leaks
from the solenoid
valve.
2. No audible
"click" when
solenoid is
activated.
Handle Switch Troubleshooting
Symptoms
1. Handle LED is
lit when the
handle is closed.
2. Handle does
not return to the
upright position.
3. Water does not
fully shut off.
4. Handle LED
does not
illuminate when
the handle is
rotated open.
1384293-2-C
Probable Cause
A. Hose connections
are not secure.
B. Internal leak.
A. Loose solenoid
wire connection.
B. Solenoid valve is
not functioning.
Probable Cause
A. Valve setscrew
needs adjustment.
A. Valve setscrew
needs adjustment.
A. Valve setscrew
needs adjustment.
A. Loose handle
switch wire
connection.
B. Circuit board is not
functioning
correctly.
Recommended Action
A. CAUTION: Risk of personal
injury or product damage. Turn
off the main power and water
supply. Check all connections.
Make adjustments as needed.
B. Replace the solenoid valve
assembly.
A. Check solenoid wire connection
to the circuit board.
B. Replace the solenoid valve
assembly.
Recommended Action
A. Refer to the "Handle LED
Adjustment" section.
A. Refer to the "Handle LED
Adjustment" section.
A. Refer to the "Handle LED
Adjustment" section.
A. Check handle switch wire
connection to the circuit board.
B. Replace the cover assembly.
16 Kohler Co.