Troubleshooting - Kohler 22036-CP Instrucciones De Instalación

Troubleshooting

CAUTION: Risk of property damage. This product contains sensitive
electronic components. Use care not to damage pins and connectors during
troubleshooting.
CAUTION: Risk of property damage. Do not insert anything other than the
sensor wire into the sensor wire connector (phone jack) on the circuit board.
This troubleshooting guide is for general aid only. For service and installation issues
or concerns, call 1-800-4KOHLER.
Faucet Troubleshooting
Symptoms
1. No water flow.
1384293-2-C
Probable Cause
A. The supply stops
are closed.
B. Handle is in the
closed position.
C. The hot and/or
cold supply hose is
kinked.
D. The outlet hose is
kinked.
E. Handle LED is not
lit.
F. Power LED on
circuit board is not
lit.
G. One or more
screens are
clogged.
Recommended Action
A. Confirm that the supply stops are
open.
B. Rotate the handle to the open
position. Refer to the "Faucet
Operation" section.
C. Confirm that the supply hoses are
not kinked. If coiled, maintain an
inside diameter (ID) of 3" (76
mm).
D. Confirm that the solenoid valve is
within 7" (178 mm) to 8" (203
mm) from the faucet centerline.
E. Refer to the "Handle Switch
Troubleshooting Table."
F. Refer to the "Sensor
Troubleshooting Table."
G. Refer to the "Cleaning the
Screens" section.
14 Kohler Co.