Master audio LN Serie Manual Usuario página 27

Master Audio
Do the same with the other channel.
It is also correct, if the installation requires so, to make the connection in the opposite
way, that is, from the amplifier to the satellite and then to the subwoofer.
Fig.5. Passive with subwoofer configuration
2.2.4. Bi-Amplified configuration with Subwoofer
2
A wire with the maximum available section (4mm minimum) will have to link the low
frequencies output channel of the amplifier to one of the subwoofers.
Two subwoofers can be also connected by bridge one to another, as long as the
polarity is strictly respected.
Connect the other output of the amplifier to the Full Range cabinets.
It is also possible to use only one amplifier for the low reinforcement, connecting each
one of the subwoofers to the two outputs of the amplifier and consequently,
connecting the Full Range cabinets to a second amplifier.
Fig.6. Bi-amplified with subwoofer configuration (option 1)
Fig.7. Bi-amplified with subwoofer configuration (option 2)
LN Series. Versión 1.5 Nov 09
27