Filling The Fuel Tank - Briggs & Stratton 1696563 Manual Del Operador

Wheel Release - Lock PINS (if equipped)
Wheels equipped with a traction lock pin (A, Figure 7) can
be completely released by removing the pin and installing it
in the outer axle hole. Reverse this process to engage the
drive wheel.
A
Figure 7
Deflector Adjustment
A. Manual Deflector Control (if equipped)
Loosen the deflector knob (A, Figure 8), adjust the deflector
to the desired position, and then tighten the knob to secure.
Raise the deflector to throw snow further.
B. Electric Deflector Control (if equipped)
While the engine is running, press either side of the
deflector control switch (B, Figure 8) to move the deflector
up and down. Raise the deflector to throw snow further.
C. In-Dash Deflector Control (if equipped)
Move the deflector control lever (C, Figure 8) forward
or backward to raise and lower the deflector. Raise the
deflector to throw snow further.
A
A
B
Figure 8
12
B C
C
Chute Rotation Adjustment
A. Electric Chute Rotation Control (if equipped)
While the engine is running, press either side of the chute
rotation switch (A, Figure 9) to rotate the chute left or right.
B. In-Dash Chute Rotation Control (if equipped)
Locate the in-dash chute rotation crank (B, Figure 9).
Rotate the crank to rotate the chute.
C. Lefthand Crank Chute Rotation Control (if
equipped)
Locate the lefthand chute rotation crank (C, Figure 9)
Rotate the crank to rotate the chute.
A
B
C
Figure 9

Filling the Fuel Tank

Please refer to the engine operator's manual for information
about filling the fuel tank, and for fuel recommendations.