GYS PRESS 8T Manual De Instrucciones página 18

Translation of
the original
notice
ADAPTER FORCE SETTINGS
The pulling strength is based on the effort supplied by the riveter:
Correspondence table with the pulling strengh provided by the riveting machine and the air pressure at the riveter
inlet.
Air pressure 2 bar / 29 Psi
Effort
Riveting
Adapter
Machine
GYSPRESS 8T 20 kN 10 kN
GYSPRESS 8T PP 20 kN 10 kN
GYSPRESS 10T 29 kN 19,5 kN
GYSPRESS 10T PP 29 kN 19,5 kN
GYSPRESS 10T Connect 29 kN 19,5 kN
STROKE SETTINGS
The adapter stroke is adjustable from 0 to 25 mm.
This is done by using the A knob.
Screw it in tightly to get 0 stroke.
Unscrew all the way down to have 25 mm of travel.
DIFFERENT KITS ON ADAPTER
Kit 1 :
Blind rivet installation for shank diameter up to 5 mm + self-pierce rivet extraction.
Kit 2 :
Installation of blind rivet nuts and bolts M5 to M14.
Kit 3 :
Extension for Blind rivet installation for shank diameter up to 5 mm + self-pierce rivet
extraction.
Kit 4 :
Installation of blind rivets ø 9.8 mm.
50KN BLIND RIVET ADAPTER FOR 10T RIVETER
3 bar / 44 Psi 4 bar / 58 Psi
Riveting Riveting
Adapter Adapter
Machine Machine
30 kN 15 kN 40 kN 20 kN
30 kN 15 kN 40 kN 20 kN
44 kN 22 kN 58 kN 29 kN
44 kN 22 kN 58 kN 29 kN
44 kN 22 kN 58 kN 29 kN
5 bar / 72 Psi 6 bar / 87 Psi
Riveting Riveting
Adapter Adapter
Machine Machine
50 kN 25 kN 60 kN 30 kN
50 kN 25 kN 60 kN 30 kN
72 kN 36 kN 87 kN 43,5 kN
72 kN 36 kN 87 kN 43,5 kN
72 kN 36 kN 87 kN 43,5 kN
6,5 bar / 94 Psi 7 bar / 101 Psi
Riveting Riveting
Adapter Adapter
Machine Machine
65 kN 32,5 kN 70 kN 35 kN
65 kN 32,5 kN 70 kN 35 kN
100 kN 50 kN 100 kN 50 kN
100 kN 50 kN 100 kN 50 kN
100 kN 50 kN 100 kN 50 kN
0
EN
8 bar / 116 Psi
Riveting
Adapter
Machine
80 kN 40 kN
80 kN 40 kN
100 kN 50 kN
100 kN 50 kN
100 kN 50 kN
25
A