Publicidad
Idiomas disponibles
Idiomas disponibles
Translation of
the original
notice
KIT 2
INSTALLATION OF BLIND RIVET NUTS AND BOLTS M5 TO M14.
5
4
Assembly order of kit 2:
1- Put on the driver 1
2- Position the screw adapted to the blind rivet nut or bolt (M5, M6, M8, M10, M12, M14).
3- Screw on the locking nut 3 with the 2 spanners (tighten well)
4- Screw the nozzle holder 4
5- Screw the nozzle 5 adapted to the blind rivet nut or bolt (M5, M6, M8, M10, M12, M14)
6- Position drive wheel 6 (push button 7 to insert it)
To remove the knob, push button 7 and pull the knob.
Pair of screws and nozzle depending on the insert to be installed:
Blind rivet nuts M14
Blind rivet nuts M12
Blind rivet nuts M10
Blind rivet nuts M8
50KN BLIND RIVET ADAPTER FOR 10T RIVETER
3
2
1
6-4
Nozzle M14
Nozzle M12
Nozzle M10
Nozzle M8
6
7
6-5
6-6
6-2
7
EN
6-3
6-1
6-4
Rod M14
Rod M12
Rod M10
Rod M8
Screw M8
Publicidad
