Troubleshooting Guide; Blade - KitchenAid KSB6060 Manual Del Usuario

Ocultar thumbs Ver también para KSB6060:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING GUIDE

Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
Problem
Status indicator light is off while
unit is plugged in and On/Off
switch is in On position:
Status indicator light is flashing
orange color:
Blender stops after continuously
running for 6 minutes:
Blender stops while blending:
If the ingredients of a recipe
aren't blending:
Blender jar overflows:
Troubleshooting does not solve
the problem:
WARNING
Electrical Shock Hazard
After 10 minutes of no activity, the blender will go into
Sleep mode. Flip START/STOP toggle switch up or down
to bring the blender back into Standby mode.
Indicates error mode. This can be caused by: using
a spatula or any other utensil that could obstruct the
blade to freely spin, or having an ice cube or hard food
in a location that locks up the blade.
Unplug the blender and remove the jar from the base,
and clear the items. Place the jar back on the base, and
then turn on the blender to continue regular use.
This is normal operation for variable speed functions.
Refer to "Blender function guide" for details.
If blender stops prior to the completion of the selected
function, contact an authorized service center for
assistance.
An air pocket can be created around the blade causing
the ingredients to miss the blade. Use the tamper to
push ingredients down into the blade. Refer to "Using
the commercial blender" section. For certain recipes,
adding more liquid may also assist in incorporating the
ingredients.
Unplug and remove the jar pad from the housing to
make sure the base is fully dry. The control dial can be
detached by pulling it off with force. Wipe dry, and then
replace it back.
See the "Warranty and service" section. Contact an
Authorized Service Center for assistance.
Do not return the Blender to the retailer – retailers do
not provide service.
Solution
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ksb6070

Tabla de contenido