Installing The Primary 2.5-Inch Hard-Disk Drive Assembly - Dell OptiPlex 7080 Manual De Servicio

Steps
1. Insert the hard-disk drive assembly into the slot on the computer until it clicks into place.
2. For 2.5-inch hard-disk drive set as secondary, connect the black hard-drive data cable and power cable to the connectors on the 2.5-
inch hard drive.
Next steps
1. Install the side cover.
2. Follow the procedure in after working inside your computer.

Installing the primary 2.5-inch hard-disk drive assembly

Prerequisites
Si va a reemplazar un componente, quite el componente existente antes de realizar el procedimiento de instalación.
About this task
The following image indicates the location of the 2.5-inch hard drive and provides a visual representation of the installation procedure.
Desmontaje y reensamblaje 27