Removing The 3.5-Inch Hard-Disk Drive Bracket - Dell OptiPlex 7080 Manual De Servicio

About this task
The following images indicate the location of the 3.5-inch hard-disk drive assembly and provides a visual representation of the removal
procedure.
Steps
1. Disconnect the data and power cables from the 3.5-inch hard-disk drive module.
2. Push the securing tab to release the hard-disk drive assembly from the chassis.
3. Remove the EMI shied from the front side of the chassis.
4. Slide the hard-disk drive assembly away from the chassis.

Removing the 3.5-inch hard-disk drive bracket

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the 3.5-inch hard-disk drive
before working inside your
assembly.
computer.
Desmontaje y reensamblaje 29