Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
control configured as partial opening is activated.
To set partial opening set the PROG switch to the position as shown in the figure
below, and press the LEARN button according to desired setting:
PROG SWITCH POSITION
1 time
20%
4 times
80%
36 - ENGINE DIRECTION
To reverse the motor direction (we recommend doing it right after learning), turn
the PROG switch to the position as shown in the figure below, and press the
LEARN button once. By pressing the LEARN button the LED will start to flash 5
times indicating that the direction has been successfully reversed.
PROG SWITCH POSITION
1 time
REVERSE DIRECTION
4 times
-
PROGRAMMING
LED BLINKS
2 times
40%
5 times
-
PROGRAMMING
LED BLINKS
2 times
-
5 times
REVERSED
INGLÊS
PARTIAL
OPENING
3 times
60%
-
-
PARTIAL
OPENING
3 times
-
-
-
77
Publicidad
Tabla de contenido
