GBD SC230 Instrucciones Para La Instalación página 13

SC230
6 - ELECTRICAL CONNECTIONS: FASTON
Faston
CN2 CN3
CN4 CN5
7 - PROTECTION FUSES
Position Value
F1 500 mA
F2 5 A
F3 500 mA
8 - DIP SWITCH SW1
The settings are stored during the rest phase (gate closed).
The DEFAULT settings are coloured in grey
DIP Function
STEP–BY-STEP
WITH STOP
STEP–BY-STEP
DIP 1
DIP 2
CONDOMINIUM
DEAD MAN
DIP 3 PRE-FLASHING
Ground connection
Motor capacitor connection
Type Description
Protects the electronic card
FAST
FAST Protects the control unit at 115 Vac power supply input
Protects the ACCESSORIES and SAFETY DEVICES power supply outputs
FAST
Status
Operation in reply to a START command:
Ÿ Gate closed
Ÿ During opening
OFF
Ÿ Gate open
OFF
Ÿ During closing
Ÿ After a STOP
Operation in reply to a START command:
Ÿ Gate closed
ON
Ÿ During opening
OFF
Ÿ Gate open
Ÿ During closing
Operation in reply to a START command:
Ÿ Gate closed
Ÿ During opening
OFF
Ÿ Gate open
ON
reclosing is enabled, otherwise closes.
Ÿ During closing
If Start button is held down:
If Pedestrian button is held down:
ON
The SAFETY 8K2, PHOTO inputs and the decelerations will not be active.
ON
STOP 8K2 will be enabled.
Not manageable with radio control.
Enables the pre-flashing of 3 seconds before the activation of the motor in opening and
ON
closing.
Disables the pre-flashing.
OFF
Description
Description
→
OPENS
→
STOPS
→
CLOSES
→
STOPS
→
inverts the motion
→
OPENS
→
CLOSES
→
CLOSES
→
OPENS
→
OPENS
→
IRRELEVANT
→
Recharges the automatic closing time if the automatic
→
OPENS
OPENS
CLOSES
13
UK