Important Features; Inserting Batteries - Revell Control LAMBORGHINI AVENTADOR POLICE Manual De Usuario

24656
Safety instructions:
• Before using for the first time,
make sure that you have read
and understood the entire manual.
• Please keep the manual and
packaging as they contain important
instructions.
• The user should only operate this
model in accordance with the
instructions for use in this operating
manual.
• This model is suitable for pilots who
are at least 8 years of age. Parental
supervision is required when driving it.
• Warning! Not suitable for children
under 36 months. Small parts.
Choking hazard!
• This model is suitable for use indoors
and in dry outdoor areas.
• Keep your hands, face and loose
clothing away from the model during
operation.
• Switch off the transmitter and model
when they are not in use.
• Remove the batteries from the
transmitter and the model when they
are not in use.
• Always maintain visual contact with
the model in order to avoid losing
control of it. Inattentive and careless
use can lead to considerable damage.
• Do not operate the model near people,
animals, roads or bodies of water.
• This model is not suitable for people
with physical or mental limitations.
We recommend that people who are
unfamiliar with transmitter models
operate the model under the guidance
of someone with experience.
• A model should never be operated
under the influence of drugs or alcohol.
• This vehicle may not be used on public
roads!
10

IMPORTANT FEATURES

RC Scale Car with two-channel
MHz transmitter
• True to original vehicle replication
• Longer driving fun without charging
thanks to battery operation
• Robust construction
• In general, it must be ensured that
the model cannot injure anyone in
consideration of potential malfunctions
and defects.
• The model may only be repaired or
modified with genuine Revell control
spare parts. Otherwise, the vehicle
can be damaged or pose a danger. In
order to prevent risks, always operate
the model from a position which
provides an easy line of retreat, if
necessary.
Transmitter safety instructions:
• Rechargeable batteries must be
removed from the transmitter or the
model prior to recharging.
• Non-rechargeable batteries may not
be charged.
• Rechargeable batteries may only
be charged under the supervision of
an adult.
• The combination of different types of
batteries as well as new and used
batteries must be avoided.
• Only recommended batteries or those
of an equivalent type may be used.
• We recommend new alkali manga-
nese batteries for the transmitter.
Single-use batteries for this transmit-
ter and other electrical devices
operated in the home can be
replaced with environmentally-friendly
rechargeable batteries.
• Batteries must be inserted according
to the correct polarity (+ and -).
• Depleted batteries must be removed
from the transmitter.
• The connection terminals may not be
short-circuited.
• Please remove the batteries from the
transmitter if it is not to be used for
an extended period of time.
• Remove the batteries from the
transmitter and model if they are not
to be used for an extended period of
time.
Maintenance and care:
• Please only use a clean, damp cloth to
wipe off the model.
• Protect the model and batteries from
direct sunlight and/or direct heat.
• Never allow the transmitter to come
into contact with water, because the
electronics can be damaged as a
result.
• Technical changes and differences in
colour reserved!
Battery requirement for
the transmitter:
Power supply:
Batteries: 2 x 1,5 V AA
(not supplied)
Battery requirement for
the vehicle:
Power supply:
Batteries: 3 x 1,5 V AA
(not supplied)
1 VEHICLE
1A Driven axle
1B Front and rear headlamps
1C Antenna
1D ON/OFF switch
1E Trim lever
1F Battery compartment securing screw
2 TRANSMITTER
2A Forward button 2F Battery
compartment
2B Reverse button
2G Securing lever
2C Button for left
2H LED
2D Button for right
2E Antenna
Please note: The transmitter does
not have an ON/OFF switch. It is activated
automatically when the steering lever
is actuated.

3 INSERTING BATTERIES

Transmitter
3A Unscrew the securing screw of the bat-
tery compartment anticlockwise with a
standard screwdriver and carefully open
the battery compartment cover.
3B Now insert 2 x AA batteries and pay
attention to the polarity specification,
as shown in the battery compartment.
3C Carefully insert the accompanying
antenna in the hole on the top of the
transmitter and screw it in carefully in a
clockwise motion.
Modell
3D Unscrew the securing screw of the
battery compartment anticlockwise
with a standard screwdriver and care-
fully open the battery compartment
cover.
3E Now insert 3 x 1.5 V AA batteries and
pay attention to the polarity specification,
as shown in the battery compartment.
3F Then replace the cover and screw in the
securing screw clockwise.
11