Coaxial Cable; Cleaning The Wire Guide - Abicor Binzel FCAW Instructivo De Servicio

ALPHA FLUX

9.2 Coaxial cable

9.3 Cleaning the wire guide

1 Check all screw joints for tight fit.
2 Replace wire guide liner when worn or soiled.
3 Replace defective, deformed or worn parts.
ABICOR BINZEL offers repair services at the factory.
1 Lay out the welding torch in stretched position.
2 Unscrew retaining sleeve / clamping screw and pull out liner.
WARNING
Risk of injury
Serious injuries caused by parts swirling around.
• When cleaning the wire guide with compressed air, wear suitable
protective clothing, in particular safety goggles.
3 Clean liner and coaxial cable from both sides with compressed air.
4 Slide adjusted liner into coaxial cable and secure with retaining sleeve /
clamping screw.
9 Maintenance and cleaning
EN - 13