Putting Into Operation; Risk Of Injury - Abicor Binzel FCAW Instructivo De Servicio

ALPHA FLUX

6 Putting into operation

6.1 Equipping the torch neck
DANGER
Risk of injury due to unexpected start-up.
The following instructions must be adhered to throughout all maintenance,
servicing, assembly, disassembly and repair work:
• Switch off the power supply.
• Pull the mains plug.
NOTICE
• Do not use the welding torch in rain, snow or other weather conditions.
• The system may only be installed and put into operation by authorized
personnel (in Germany see TRBS 1203).
CAUTION

Risk of injury

Puncture wound may be puncture caused by electrode tip.
• Do not reach into the danger zone and wear protective gloves.
NOTICE
There are two different machine connection versions:
• Central plug KZ-2 FK, see 6.3 Mounting the liner on page EN-9.
• LN connection, see 6.4 Mounting the torch on the machine side on
page EN-10
Depending on the connection version, different components are used.
6 Putting into operation
EN - 7