JVC KW-M25BT Guia De Inicio Rapido página 12

Installation
4
Fix a cable with a commercial item of tape.
✎
NOTE
• Swap the clips if necessary.
Ñ Removing the trim plate
1) Use the extraction key (accessory 3) to lever out the
four tabs (two on the left part, two on the right part).
2) Pull the trim plate forward.
12
!B5K-0670-00_KWM_K_QSG.indb 12
Ñ Removing the unit
1) Remove the trim plate by referring to step 1 in
"Removing the trim plate".
2) Insert the extraction key (accessory 2) deeply into
the slot as shown. (The protrusion at the tip of the
extraction key must face toward the unit.)
3) With the inserted extraction key secured, insert the
other extraction key into the slot.
4) Pull out the unit halfway.
3
✎
NOTE
• Be careful to avoid injury from the catch pins on the
extraction key.
5) Pull the unit all the way out with your hands, being
careful not to drop it.
2
2
2019/02/15 11:00