Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
General
WARNING! The user must only carry out the
!
maintenance and service work described in
this manual. More extensive work must be
carried out by an authorized service
workshop.
Shut down the machine and disconnect the
power plug.
Wear personal protective equipment. See
instructions under the heading "Personal
protective equipment".
The life span of the machine can be reduced
and the risk of accidents can increase if
machine maintenance is not carried out
correctly and if service and/or repairs are
not carried out professionally. If you need
further information please contact your
nearest servicing dealer.
Daily maintenance
•
Check that the machine's safety equipment is
undamaged. See instructions in the section "Machine's
safety equipment".
•
Clean the outside of the machine. Do not use a high
pressure washer to clean the saw.
•
Check that the rubber in the guide wheels is in place and
not worn.
•
Check the bearings. Rotate the wheels by hand and make
sure they rotate freely.
Service
In addition to the daily maintenance such as cleaning and
lubrication, the machine must be serviced. After 50 hours of
cutting, the machine should be serviced at an accredited
Husqvarna workshop. The saw should then be serviced after
every 100 hours of operation. The service is important so that
as the user you have a machine that works as effectively as
possible for a long time.
20 –
English
MAINTENANCE
Publicidad
Capítulos
Tabla de contenido
