1
Burner description
Gas burner with one stage working.
The burner is approved for intermittent operation as per Directive EN 676.
The burner meets protection level of IP X0D (IP 40), EN 60529.
1 – Air damper
2 – Screws for fixing the air damper
3 – 7 pole socket for electrical supply
and control
4 – Cable grommet
5 – Screw for fixing the cover
6 – Air pressure switch
7 – 6 pole socket for gas train
8 – Control box
9 – Reset button with lock-out lamp
10 – Flange
NOTES:
– Gas train can be installed on the right or on the left of the burner.
– The cable grommet (4) Fig. 1 and the screw for fixing the cover (5) supplied with the burner, must be fitted
to the same side of the gas train.
1.1
Burner equipment
Insulating gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Screws and nuts for flange to be fixed to boiler . . . . . . . . . No. 4
Cable grommet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Screw for fixing the cover . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
7 pin plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
1.2
Accessory
Kit interface adapter RMG to PC Code 3002719
20008491
9
8
6
5
4
7
2
GB
D4182
3
Fig. 1
10
1
2
2