Honda Civic 1999 1.6 EX Aviso De Reparación página 3

Idiomas disponibles

Remove the CKF sensor from the oil pump.

10. Loosen the adjusting bolt 180°. Push the tensioner to remove tension from the timing belt, then retighten the adjusting bolt.

11. Remove the timing belt.

INSTALLATION

Install the timing belt in the reverse order of removal; Only key points are described here.

Set the timing belt drive pulley so that the No. 1 piston is at Top Dead Center (TDC). Align the groove on the timing belt drive

pulley to the pointer on the oil pump.

Tabla de Contenido